Profile:
| Face/Back | Okoume, Bintangor, Pencil Cedar, Keruing, Poplar, Birch,Pine,Maple, Hardwood, Ash, Oak and as your requested | |
| Core: | Poplar, Hardwood, Hardwood Combi, Birch, eucalypts, as your requirement. | |
| Grade: | BB/BB, BB/CC, CC/CC, CC/DD,DD/EE, etc. | |
| Glue: | MR/E0/E1/E2 | |
| Size(mm) | 1220*2440mm,1250*2500mm,915*2135mm,915*1830mm | |
| Thickness(mm) | 2.0-25.0mm | 1/8inch(2.7-3.6mm) |
| 1/4inch(6-6.5mm) | ||
| 1/2inch(12-12.7mm) | ||
| 5/8inch(15-16mm) | ||
| 3/4inch(18-19mm) | ||
| Moisture | 10-15% | |
| Thickness tolerance | Less than 6mm | +/-0.2mm to 0.3mm |
| 6-30mm | +/-0.4mm to 0.5mm | |
| Usage | Usage adequate for making furniture or construction, package or industry, | |
| Features: | ||
| wear-resistant,anti-cracking,anti-acid and alkaline-resistant | ||
| can be cut int samll size for reusing. | ||
FAQ:
Q: Do you have BS 1088 certification papers? What about Lloyd's approval, do you have this also?
A:Yes, we have the Lloyds certificate for our marine plywood
Q:Are panels 100% okoume throughout?
A:Yes
Q:Are face/back one piece only?
A:Yes
Q:What is face/back veneer thickness before/after sanding?
A:1.1mm before sanding and 1mm after sanding
Q: Do you use WBP waterproof glue that will pass the 72 hrs boil test? For face/back, mills often use
waterproof melamine glue in order to avoid glue bleed problems.
A:Yes, we use 100% Dynea WBP glue for our marine plywood.
Q:What is the moisture content of the panels?
A:10~12%
Q: Are all veneers machine dried by proper steam dryers and not just using hot press to dry?
A:Yes,all veneers is dried by proper steam dryers
Q:What are the thicknesses you can produce and what is the number of plies for each thickness?
A:We can produce from 2mm~40mm
4mm 3plys 6mm 5plys 9mm 7plys 12mm 9plys 15mm 11plys 18mm 13plys
Q:What is the final sanding grit for face/back?
A:400 sanding grit for face/back
